# Contributing Feedback and contributions are very welcome! Here's help on how to make contributions, divided into the following sections: The quick-read part: * general information, * vulnerability reporting, * documentation. The long-read part: * code changes, * how to check proposed changes before submitting them, * reuse of other libraries, frameworks etc. ## General information For specific proposals, please provide them as [pull requests](https://github.com/quotient-im/libQuotient/pulls) or [issues](https://github.com/quotient-im/libQuotient/issues) For general discussion, feel free to use our Matrix room: [#quotient:matrix.org](https://matrix.to/#/#quotient:matrix.org). If you're new to the project (or FLOSS in general), [issues tagged as easy](https://github.com/quotient-im/libQuotient/labels/easy) are smaller tasks that don't require much knowledge about the project. You are welcome aboard! ### Pull requests and different branches recommended Pull requests are preferred, since they are specific. See the GitHub Help [articles about pull requests](https://help.github.com/articles/using-pull-requests/) to learn how to deal with them. We recommend creating different branches for different (logical) changes, and creating a pull request when you're done; the development integration branch is `dev`. See the GitHub documentation on [creating branches](https://help.github.com/articles/creating-and-deleting-branches-within-your-repository/) and [using pull requests](https://help.github.com/articles/using-pull-requests/). ### How we handle proposals We use GitHub to track all changes via its [issue tracker](https://github.com/quotient-im/libQuotient/issues) and [pull requests](https://github.com/quotient-im/libQuotient/pulls). Specific changes are proposed using those mechanisms. Issues are assigned to an individual who works on it and then marks it complete. If there are questions or objections, the conversation area of that issue or pull request is used to resolve it. ### License Unless a contributor explicitly specifies otherwise, we assume contributors to agree that all contributed code is released either under *LGPL v2.1 or later*. This is more than just [LGPL v2.1 libQuotient now uses](./COPYING) because the project plans to switch to LGPL v3 for library code in the near future. Any components proposed for reuse should have a license that permits releasing a derivative work under *LGPL v3 or later* (that includes licenses permitting *LGPL v2.1 or later* but not *LGPL v2.1 only*). In any case, the component should be redistributable under a license from [the list approved by OSI](https://opensource.org/licenses), no exceptions. We use [SPDX](https://spdx.dev) conventions for copyright statements. Please follow them when making a sizable contribution: add your name and year to the top of the file. New files should begin with the following preamble: ```cpp // SPDX-FileCopyrightText: 2021 Your Name // SPDX-License-Identifier: LGPL-2.1-or-later ``` ## Vulnerability reporting (security issues) - see [SECURITY.md](./SECURITY.md) ## Documentation changes Most of the documentation is in Markdown format. All Markdown files use the .md filename extension. Any help on fixing/extending these is more than welcome. Where reasonable, limit yourself to Markdown that will be accepted by different markdown processors (e.g., what is specified by CommonMark or the original Markdown). In practice, as long as libQuotient is hosted at GitHub, [GFM (GitHub-flavoured Markdown)](https://help.github.com/articles/github-flavored-markdown/) is used to show those files in a browser, so it's fine to use its extensions. In particular, you can mark code snippets with the programming language used; blank lines separate paragraphs, newlines inside a paragraph do *not* force a line break. Beware - this is *not* the same markdown algorithm used by GitHub when it renders issue or pull comments; in those cases [newlines in paragraph-like content are considered as real line breaks](https://help.github.com/articles/writing-on-github/); unfortunately this other algorithm is *also* called GitHub-flavoured markdown. (Yes, it'd be better if there were different names for different things.) In your markdown, please don't use tab characters and avoid "bare" URLs. In a hyperlink, the link text and URL should be on the same line. While historically we didn't care about the line length in markdown texts (and more often than not put the whole paragraph into one line), this is no more recommended; instead, try to use 80-character limit (similar to the limit for C/C++ code) _except hyperlinks_ - wrapping breaks them. Do not use trailing two spaces for line breaks, since these cannot be seen and may be silently removed by some tools. If, for whatever reason, a blank line is not an option, use <br /> (an HTML break). ## End of TL;DR If you don't plan/have substantial contributions, you can stop reading here. Further sections are for those who's going to actively hack on the library code. ## Code changes The code should strive to be DRY (don't repeat yourself), clear, and obviously correct (i.e. buildable). Some technical debt is inevitable, just don't bankrupt us with it. Refactoring is welcome. ### Code style and formatting As of Quotient 0.7, the C++ standard for newly written code is C++20 with a few restrictions, notably: * enumerators and slots cannot have `[[attributes]]` because moc from Qt 5.12 chokes on them - this will be lifted when we move on to Qt 5.13 for the oldest supported version, in the meantime use `Q_DECL_DEPRECATED` and similar Qt macros - they expand to nothing when the code is passed to moc. * explicit lists in lambda captures are preferred over `[=]`; note that C++20 deprecates implicit `this` capture in `[=]`. The code style is defined by `.clang-format`, and in general, all C++ files should follow it. Files with minor deviations from the defined style are still accepted in PRs; however, unless explicitly marked with `// clang-format off` and `// clang-format on`, these deviations will be rectified any commit soon after. Notable things from .clang-format: * 4-space indents, no tabs, no trailing spaces, no last empty lines. If you spot the code abusing these - thank you for fixing it. * Prefer keeping lines within 80 characters. Slight overflows are ok only if that helps readability. Additionally: * Please don't make "hypocritical structs" with protected or private members. In general, `struct` is used to denote a plain-old-data structure, rather than data+behaviour. If you need access control or are adding yet another non-trivial (construction, assignment) member function to a `struct`, just make it a `class` instead. * For newly created classes, keep to [the rule of 3/5/0](http://en.cppreference.com/w/cpp/language/rule_of_three) - make sure to read about the rule of zero if you haven't before, it's not what you might think it is. * Qt containers are generally preferred to STL containers; however, there are notable exceptions, and libQuotient already uses them: * `std::array` and `std::deque` have no direct counterparts in Qt. * Because of COW semantics, Qt containers cannot hold uncopyable classes. Classes without a default constructor are a problem too. Examples of that are `SyncRoomData` and `EventsArray<>`. Use STL containers for structures having those but see the next point and also consider if you can supply a reasonable copy/default constructor. * STL containers can be freely used in code internal to a translation unit (i.e., in a certain .cpp file) _as long as that is not exposed in the API_. It's ok to use, e.g., `std::vector` instead of `QVector` to tighten up code where you don't need COW, or when dealing with uncopyable data structures (see the previous point). However, exposing STL containers in the API is not encouraged (except where absolutely necessary, e.g. we use `std::deque` for a timeline). Especially when it comes to API intended for usage from QML (e.g. `Q_PROPERTY`), STL containers or iterators are unlikely to work and therefore unlikely to be accepted into `dev`. * Notwithstanding the above (you're not going to use them with QML anyway), prefer `std::unique_ptr<>` over `QScopedPointer<>` as it gives stronger guarantees. * Always use `QVector` instead of `QList` unless Qt's own API uses it - see the [great article by Marc Mutz on Qt containers](https://marcmutz.wordpress.com/effective-qt/containers/) for details. With Qt 6, these two become the same type matching what used to be `QVector` in Qt 5. ### API conventions Calls, data structures and other symbols not intended for use by clients should _not_ be exposed in (public) .h files, unless they are necessary to declare other public symbols. In particular, this involves private members (functions, typedefs, or variables) in public classes; use pimpl idiom to hide implementation details as much as possible. `_impl` namespace is reserved for definitions that should not be used by clients and are not covered by API guarantees. Note: As of now, all header files of libQuotient are considered public; this may change eventually. ### Comments Whenever you add a new call to the library API that you expect to be used from client code, make sure to supply a proper doc-comment along with the call. Quotient uses the Doxygen style; some legacy code may use Javadoc style but it is not encouraged any more. Some parts are not documented at all; adding doc-comments to them is highly encouraged and is a great first-time contribution. Use `\brief` for the summary, and follow with details after an empty doc-comment line, using `\param`, `\return` etc. as necessary. For in-code comments, the advice is as follows: * Don't restate what's happening in the code unless it's not really obvious. We assume the readers to have some command of C++ and Qt. If your code is not obvious, consider making it clearer itself before commenting. * That said, both C++ and Qt have their arcane features and dark corners, and we don't want to limit anybody who feels they have a case for variadic templates, raw literals, and so on. Use your experience to figure what might be less well-known to readers and comment such cases: leave references to web pages, Quotient wiki etc. * Make sure to document not so much "what" but more "why" certain code is done the way it is. In the worst case, the logic of the code can be reverse-engineered; but you can almost never reverse-engineer the line of reasoning and the pitfalls avoided. ### Automated tests We gradually introduce autotests based on a combination of CTest and Qt Test frameworks - see `autotests/` directory. There are very few of those, as we have just started adding those to the new code (you guessed it; adding more tests to the old code is very welcome). Aside from that, libQuotient comes with a command-line end-to-end test suite called Quotest. Any significant addition to the library API should be accompanied by a respective test in `autotests/` and/or in Quotest. To add a test to autotests: - In a new .cpp file in `autotests/`, define a test class derived from QObject with `private Q_SLOTS:` section having the member functions called for testing. If you feel more comfortable using a header file to define the class, feel free to do so. If you're new to Qt Test framework, use existing tests as a guidance. - Add a `quotient_add_test` macro call with your test to `autotests/CMakeLists.txt` To add a test to Quotest: - In `quotest.cpp`, add a new test to the `TestSuite` class. Similar to Qt Test, each test in Quotest is a private slot; unlike Qt Test, you should use special macros, `TEST_DECL()` and `TEST_IMPL()`, to declare and define the test (those macros conceal passing the testing handle in `thisTest` variable to the test method). - In the test function definition, add test logic using `FINISH_TEST` macro to check for the test outcome and complete the test (be mindful that `FINISH_TEST` always `return`s, not only in case of error). ALL (even failing) branches should conclude with a `FINISH_TEST` (or `FAIL_TEST` that is a shortcut for a failing `FINISH_TEST`) invocation, unless you intend to have a "DID NOT FINISH" message in the logs in certain conditions. The `TestManager` class sets up some basic test fixture to help you with testing; notably, the tests can rely on having an initialised `Room` object with loaded state for the test room in `targetRoom` member variable. Note that it's normal for tests to go async, which is not something Qt Test is easy with (and this is why Quotest doesn't directly use Qt Test but rather fetches a few ideas from it). ### Security, privacy, and performance Pay attention to security, and work *with*, not against, the usual security hardening practices (however few in C++). `char *` and similar unchecked C-style read/write arrays are forbidden - use Qt containers or at the very least `std::array<>` instead. Where you see fit (usually with data structures), try to use smart pointers, especially `std::unique_ptr<>` or `QScopedPointer` instead of bare pointers. When dealing with `QObject`s, use the parent-child ownership semantics exercised by Qt (this is preferred to using smart pointers). If you find a particular use case where the strict semantic of unique pointers doesn't help and a shared pointer is necessary, feel free to step up with the working code and it will be considered for inclusion. Exercise the [principle of least privilege](https://en.wikipedia.org/wiki/Principle_of_least_privilege) where reasonable and appropriate. Prefer less-coupled cohesive code. Protect private information, in particular passwords and email addresses. Absolutely _don't_ spill around this information in logs, and only display those in UI where really needed. Do not forget about local access to data (in particular, be very careful when storing something in temporary files, let alone permanent configuration or state). Avoid mechanisms that could be used for tracking where possible (we do need to verify people are logged in but that's pretty much it), and ensure that third parties can't use interactions for tracking. Matrix protocols evolve towards decoupling the personally identifiable information from user activity entirely - follow this trend. We want the software to have decent performance for users even on weaker machines. At the same time we keep libQuotient single-threaded as much as possible, to keep the code simple. That means being cautious about operation complexity (read about big-O notation if you need a kickstart on the subject). This especially refers to operations on the whole timeline and the list of users - each of these can have tens of thousands of elements so even operations with linear complexity, if heavy enough (with I/O or complex processing), can produce noticeable GUI freezing or stuttering. When you don't see a way to reduce algorithmic complexity, either split processing into isolated pieces that can be individually scheduled as queued events (see the end of `Connection::consumeRoomData()` to get the idea) or uncouple the logic from GUI and execute it outside of the main thread with `QtConcurrent` facilities. Having said that, there's always a trade-off between various attributes; in particular, readability and maintainability of the code is more important than squeezing every bit out of that clumsy algorithm. Beware of premature optimization and profile the code before before diving into hardcore tweaking that might not give the benefits you think it would. Speaking of profiling logs (see README.md on how to turn them on) - if you expect some code to take considerable (more than 10k "simple operations") time you might want to setup a `QElapsedTimer` and drop the elapsed time into logs under `PROFILER` logging category. See the existing code for examples - `room.cpp` has quite a few. In order to reduce small timespan logging spam, `PROFILER` log lines are usually guarded by a check that the timer counted big enough time (200 microseconds by default, 20 microseconds for tighter parts). ### Generated C++ code for CS API The code in `lib/csapi`, `lib/identity` and `lib/application-service`, although it resides in Git, is actually generated from the official Swagger/OpenAPI definition files. If you're unhappy with something in there and want to improve the code, you have to understand the way these files are produced and setup some additional tooling. The shortest possible procedure resembling the below text can be found in .github/workflows/ci.yml (our CI configuration tests regeneration of those files). As described below, there is also a handy build target for CMake. #### Why generate the code at all? Because otherwise we have to do monkey business of writing boilerplate code, with the same patterns, types etc., literally, for every single API endpoint, and one of libQuotient authors got fed up with it at some point in time. By then about 15 job classes were written; the entire API is about 100 endpoints and counting. Besides, the existing jobs had to be updated according to changes in CS API that have been, and will keep, coming. Other considerations can be found in [this talk about API description languages](https://youtu.be/W5TmRozH-rg) that also briefly touches on GTAD. #### Prerequisites for CS API code generation 1. Get the source code of GTAD and its dependencies. Recent libQuotient includes GTAD as a submodule so you can get everything you need by updating gtad/gtad submodule in libQuotient sources: `git submodule update --init --recursive gtad/gtad`. You can also just clone GTAD sources to keep them separate from libQuotient: `git clone --recursive https://github.com/quotient-im/gtad.git` 2. Configure and build GTAD: same as libQuotient, it uses CMake so this should be quite straightforward (if not - you're probably not quite ready for this stuff anyway). 3. Get Matrix CS API definitions from a matrix-spec repo. Although the official repo is at https://github.com/matrix-org/matrix-spec.git` (formerly https://github.com/matrix-org/matrix-doc.git), you may or may not be able to generate working code from it because the way it evolves is not necessarily in line with libQuotient needs. For that reason, a soft fork of the official definitions is kept at https://github.com/quotient-im/matrix-spec.git that guarantees buildability of the generated code. This repo closely follows the official one (but maybe not its freshest commit), applying a few adjustments on top. And of course you can use your own repository if you need to change the API definition. 4. If you plan to submit a PR with the generated code to libQuotient or just would like it to be properly formatted, you should either ensure you have clang-format (version 10 at least) in your PATH or pass `-DCLANG_FORMAT=` to CMake, as mentioned in the next section. #### Generating CS API contents 1. Pass additional configuration to CMake when configuring libQuotient: `-DMATRIX_SPEC_PATH=/path/to/matrix-spec/ -DGTAD_PATH=/path/to/gtad`. Note that `MATRIX_SPEC_PATH` should lead to the repo while `GTAD_PATH` should have the path to GTAD binary. If you need to specify where your clang-format is (see the previous section) add `-DCLANG_FORMAT=/path/to/clang-format` to the line above. If everything's right, the detected locations will be mentioned in CMake output and will trigger configuration of an additional build target called `update-api`. 2. Generate the code: `cmake --build --target update-api`. Building this target will create (overwriting without warning) source files in `lib/csapi`, `lib/identity`, `lib/application-service` for all YAML files it can find in `/path/to/matrix-spec/data/api/client-server` and their dependencies. #### Changing generated code See the more detailed description of what GTAD is and how it works in the documentation on GTAD in its source repo. Only parts specific for libQuotient are described here. GTAD uses the following three kinds of sources: 1. OpenAPI files. Each file is treated as a separate source (unlike swagger-codegen, you do _not_ need to have a single file for the whole API). 2. A configuration file, in Quotient case it's `gtad/gtad.yaml` - common for all OpenAPI files GTAD is invoked on. 3. Source code template files: `gtad/*.mustache` - are also common. The Mustache files have a templated (not in C++ sense) definition of a network job class derived from BaseJob; if necessary, data structure definitions used by this job are put before the job class. Bigger Mustache files look a bit hideous for a newcomer; and the only known highlighter that can handle the combination of Mustache (originally a web templating language) and C++ can be found in CLion IDE. Fortunately, all our Mustache files are reasonably concise and well-formatted these days. To simplify things some reusable Mustache blocks are defined in `gtad.yaml` - see its `mustache:` section. Adventurous souls that would like to figure what's going on in these files should speak up in the Quotient room - I (Kitsune) will be very glad to help you out. The types map in `gtad.yaml` is the central switchboard when it comes to matching OpenAPI types with C++ (and Qt) ones. It uses the following type attributes aside from pretty obvious "imports:": * `avoidCopy` - this attribute defines whether a const ref should be used instead of a value. For basic types like int this is obviously unnecessary; but compound types like `QVector` should rather be taken by reference when possible. * `moveOnly` - some types are not copyable at all and must be moved instead (an obvious example is anything "tainted" with a member of type `std::unique_ptr<>`). * `useOmittable` - wrap types that have no value with "null" semantics (i.e. number types and custom-defined data structures) into a special `Omittable<>` template defined in `converters.h`, a drop-in upgrade over `std::optional`. * `omittedValue` - an alternative for `useOmittable`, just provide a value used for an omitted parameter. This is used for bool parameters which normally are considered false if omitted (or they have an explicit default value, passed in the "official" GTAD's `defaultValue` variable). * `initializer` - this is a _partial_ (see GTAD and Mustache documentation for explanations but basically it's a variable that is a Mustache template itself) that specifies how exactly a default value should be passed to the parameter. E.g., the default value for a `QString` parameter is enclosed into `QStringLiteral`. Instead of relying on the event structure definition in the OpenAPI files, `gtad.yaml` uses pointers to libQuotient's event structures: `EventPtr`, `RoomEventPtr` and `StateEventPtr`. Respectively, arrays of events, when encountered in OpenAPI definitions, are converted to `Events`, `RoomEvents` and `StateEvents` containers. When there's no way to figure the type from the definition, an opaque `QJsonObject` is used, leaving the conversion to the library and/or client code. ## How to check proposed changes before submitting them Checking the code on at least one configuration is essential; if you only have a hasty fix that doesn't even compile, better make an issue and put a link to your commit into it (with an explanation what it is about and why). ### Standard checks The following warnings configuration is applied with GCC and Clang when using CMake: `-W -Wall -Wextra -pedantic -Werror=return-type -Wno-unused-parameter -Wno-gnu-zero-variadic-macro-arguments` (the last one is to mute a warning triggered by Qt code for debug logging). We don't turn most of the warnings to errors but please treat them as such. If you use Qt Creator, the following line can be used with the Clang code model: `-Weverything -Werror=return-type -Wno-c++98-compat -Wno-c++98-compat-pedantic -Wno-unused-macros -Wno-newline-eof -Wno-exit-time-destructors -Wno-global-constructors -Wno-gnu-zero-variadic-macro-arguments -Wno-documentation -Wno-missing-prototypes -Wno-shadow-field-in-constructor -Wno-padded -Wno-weak-vtables -Wno-unknown-attributes -Wno-comma -Wno-string-conversion -Wno-return-std-move-in-c++11`. ### Continuous Integration We use CI to check buildability and smoke-testing on Linux (GCC, Clang), MacOS (Clang), and Windows (MSVC). Every PR will go through these, and you'll see the traffic lights from them on the PR page. If your PR fails on any platform double-check that it's not your code causing it - and fix (or ask how to fix if you don't know) if it is. ### clang-format We strongly recommend using clang-format (version 10 or newer) or, even better, use an IDE that supports it. This will lay over a tedious task of following the assumed code style from your shoulders (and fingers) to your computer. ### Other tools Recent versions of Qt Creator and CLion can automatically run your code through clang-tidy. The source code contains `.clang-tidy` file with the recommended set of checks that doesn't give too many false positives. Qt Creator in addition knows about clazy, a Qt-aware static analysis tool that hunts for Qt-specific issues that are easy to overlook otherwise, such as possible unintended copying of a Qt container. Most of clazy checks are relevant to our code, except: `fully-qualified-moc-types,overloaded-signal,qstring-comparison-to-implicit-char,foreach,non-pod-global-static,qstring-allocations,jni-signatures,qt4-qstring-from-array`. ### Submitting API changes If you changed the API definitions, the path to upstream becomes somewhat intricate, as you have to coordinate with two projects, making up to 4 PRs along the way. The recommended sequence depends on whether or not you have to [write a Matrix Spec Change aka MSC](https://matrix.org/docs/spec/proposals). Usually you have to, unless your API changes keep API semantics intact. In that case: 1. Submit an MSC before submitting changes to the API definition files and libQuotient. 2. The MSC gets reviewed by the Spec Core Team. This can be a lengthy process but it's necessary for the Matrix ecosystem integrity. 3. When your MSC has at least some approvals (not necessarily a complete acceptance but at least some approvals should be there) submit a PR to libQuotient, referring to your `matrix-spec` repo. Make sure that generated files are committed separately from non-generated ones (no need to make two PRs; just separate them in different commits). 4. If/when your libQuotient PR is approved and MSC is not there yet you'll be asked to submit a PR with API definition files at `https://github.com/quotient-im/matrix-spec`. Note that this is _not_ an official repo; but you can refer to your libQuotient PR as an _implementation_ of the MSC - a necessary step before making a so-called "spec PR". 5. Once MSC is accepted, submit your `matrix-spec` changes as a PR to `https://github.com/matrix-org/matrix-spec` (the "spec PR" mentioned above). This will require that your submission meets the standards set by this project (they are quite reasonable and not too hard to meet). If your changes don't need an MSC, it becomes a more straightforward combination of 2 PRs: one to `https://github.com/matrix-org/matrix-spec` ("spec PR") and one to libQuotient (with the same guidance about putting generated and non-generated files in different commits). ## Git commit messages When writing git commit messages, try to follow the guidelines in [How to Write a Git Commit Message](https://chris.beams.io/posts/git-commit/): 1. Separate subject from body with a blank line 2. Be reasonable on the subject line length, because this is what we see in commit logs. Try to fit in 50 characters whenever possible. 3. Capitalize the subject line 4. Do not end the subject line with a period 5. Use the imperative mood in the subject line (*command* form) (we don't always practice this ourselves but let's try). 6. Use the body to explain what and why vs. how (git tracks how it was changed in detail, don't repeat that). Sometimes a quick overview of "how" is acceptable if a commit is huge - but maybe split a commit into smaller ones, to begin with? ## Reuse (libraries, frameworks, etc.) C++ is unfortunately not very coherent about SDK/package management, and we try to keep building the library as easy as possible. Because of that we are very conservative about adding dependencies to libQuotient. That relates to additional Qt components and even more to other libraries. Fortunately, even the Qt components now in use (Qt Core and Network) are very feature-rich and provide plenty of ready-made stuff. Some cases need additional explanation: * Before rolling out your own super-optimised container or algorithm written from scratch, take a good long look through documentation on Qt and C++ standard library. Please try to reuse the existing facilities as much as possible. * libQuotient is a library to build Qt applications; for that reason, components from KDE Frameworks should be really lightweight and useful to be accepted as a dependency. If the intention is to better integrate libQuotient into KDE environment there's nothing wrong in building another library on top of libQuotient. Consider people who run LXDE and normally don't have KDE frameworks installed (some even oppose installing those) - libQuotient caters to them too. * Never forget that libQuotient is aimed to be a non-visual library; QtGui in dependencies is only driven by (entirely offscreen) dealing with QImages. While there's a bunch of visual code (in C++ and QML) shared between Quotient-enabled _applications_, this is likely to end up in a separate (Quotient-backed) library, rather than libQuotient itself. ## Attribution This text is based on CONTRIBUTING.md from CII Best Practices Badge project, which is a collective work of its contributors (many thanks!). The text itself is licensed under CC-BY-4.0.